Por favor, use este identificador para citar o enlazar este ítem: http://cimav.repositorioinstitucional.mx/jspui/handle/1004/1132
Design and optimization of a continuous flow system for the solar disinfection of water, for use in rural communities.
MARIA TERESA ALARCON HERRERA
IGNACIO MARTIN
Acceso Abierto
Sin Derechos Reservados
Disinfection
The design and optimization of a continuous flow solar water disinfection device is presented. The design is based on a batch disinfector, previously tested and reported, in which water was exposed to solar radiation in plastic bottles. In the new device, water flows through a plastic pipe exposed to solar radiation. The flow control is accomplished by using a solenoid valve, which permits the flow of water only when the solar radiation reaches a minimum predetermined value. In the optimization analysis, the tubing’s diameter and length-width ratio of the irradiation zone were optimized to obtain the maximum flow at the exposure time required to obtain water disinfection. External flat reflecting surfaces concentrate the incoming solar radiation over the receiving area, in order to reduce the residence time required to guarantee complete water disinfection.
2006
Artículo
Inglés
CONTROL DE LA CONTAMINACIÓN DEL AGUA
Versión revisada
submittedVersion - Versión revisada
Aparece en las colecciones: Artículos de Congresos

Cargar archivos:


Fichero Tamaño Formato  
Publ ANES-ASME Veracruz 2006 Desinfeccion.pdf446.07 kBAdobe PDFVisualizar/Abrir