Please use this identifier to cite or link to this item: http://cimav.repositorioinstitucional.mx/jspui/handle/1004/305
Study of Al composites prepared by high-energy ball milling; Effect of processing conditions
IVANOVICH ESTRADA GUEL
ROBERTO MARTINEZ SANCHEZ
Acceso Abierto
Atribución-NoComercial
https://doi.org/10.1016/j.jallcom.2015.01.018
Aluminum; Composites; High-energy milling
The present work deals with the synthesis of some Al-based composites prepared by mechanical milling and processing by powder metallurgy followed by the evaluation of process conditions as: type of additive, their concentration and milling intensity studying its effect on the characteristics of the powder composite and mechanical performance of the composite. Powder samples were microstructural characterized by electronic microscopy (SEM–TEM) and the mechanical response was followed by hardness and compressive tests. A pronounced effect on the mechanical response of the specimens was evident after the addition of reinforced particles and milling intensity. Microscopy studies showed a uniform dispersion of the reinforcing particles in the metallic matrix at nanometric scale and an important grain refinement of the Al matrix was confirmed. After processing, a 66% increase on the mechanical response was reached with 1% of additive complemented with short milling intensities.
2014
Artículo
Inglés
Mendoza-Duarte, J. M., Estrada-Guel, I., Carreño-Gallardo, C., & Martínez-Sánchez, R. (2015). Study of Al composites prepared by high-energy ball milling; Effect of processing conditions. Journal of Alloys and Compounds, 643, S172-S177.
QUÍMICA
Appears in Collections:Artículos

Upload archives