Por favor, use este identificador para citar o enlazar este ítem: http://cimav.repositorioinstitucional.mx/jspui/handle/1004/1879
Assessment of Stress Corrosion Cracking on Pipeline Steels Weldments Used in the Petroleum Industry by Slow Strain Rate Tests
OMAR VEGA
Acceso Abierto
Sin Derechos Reservados
Assessment
The Stress Corrosion Cracking (SCC) is a local corrosion process which is characterized by the initiation and propagation of cracks. It takes place under the simultaneous action of sustained tensile stresses and specific corrosive environment on a susceptible material. The formation of SCC occurs below the yield strength of the material and typically below the design stress and fatigue limit of an engineering structure. Since the first discovery of SCC on the exterior surface of a buried high pressure natural gas transmission pipeline in 1965 (Leis & Eiber, 1997), SCC has continued to make a significant contribution to the number of leaks and ruptures in pipelines. Two forms of SCC can exist on buried steel pipelines (Beavers & Harle, 2001). The first discovered form of SCC propagates intergranularly and is associated with a concentrated alkaline electrolyte in contact with the steel surface, commonly called as high pH-SCC or classical SCC. A second form of SCC was discovered in Canada in the early 1980. This form of SCC propagates transgranularly and is associated with a dilute neutral pH electrolyte in contact with the steel surface, commonly called as low pH-SCC, non-classical, or near neutral pH-SCC. Currently, there are some mechanisms proposed to explain the SCC occurrence including the following: (1) a role for hydrogen in enhancing crack tip dissolution; (2) a possible synergistic growth by fatigue and corrosion. For high pH-SCC it is observed that the mechanism involves anodic dissolution for crack initiation and propagation. In contrast, for low pH-SCC is associated with the dissolution of the crack tip and sides, accompanied by the ingress of hydrogen in the steel. Steels with high tensile strength are more susceptible to SCC. Cracks propagate as a result of anodic dissolution in front of their tip in SCC process, due to the embrittlement of their tip by hydrogen based mechanism. It was revealed that cracking behavior of pipeline steel in the soil environment depends of the cathodic protection applied. Applying different potentials levels the dominance of SCC process changes. At relatively low potential, the steel cracking is based primarily on the anodic dissolution mechanism. When the applied potential increases negatively, hydrogen is involved in the cracking process, resulting in a transgranular cracking mode (Liu et al, 2008).
2011
Capítulo de libro
Inglés
OTRAS
Versión revisada
submittedVersion - Versión revisada
Aparece en las colecciones: Libros

Cargar archivos: